best-epoxy-for-tumblers

Top 8 Best Epoxy for Tumblers: Buying Guide in 2020

For all DIY artists out there, you must know how flexible and versatile an epoxy resin is. It is used to coat, prime, and seal decorations embedded onto an object. Yet, do you really know the works of it, and what makes the best epoxy for tumblers?

Regardless of whether you are new to the world of resin art or a hobbyist that will turn anything and everything into an artwork, there is a perfect epoxy for you.

Read through to learn about the best and most trustworthy brands, as well as other tips that should help you start your new tumbler passion project!

In a rush! Check our top 3 picks below.

Top 8 Best Epoxy for Tumblers for 2020

With the help of factors that we enlisted in the latter part of this article, we were able to create this list of only the best epoxy resin used for arts and crafts.

1. ArtResin Epoxy Resin - Clear - Non-Toxic 1 gal (3.78 L)

First on the list is this one from ArtResin that’s made by the artists for the artists – delivering crystal clear and high-gloss end results! The product is specifically made for crafts and arts. It is easy to use, non-toxic, and self-leveling.

The package comes with 0.5 gallons or 1.89 liters of resin and hardener each.

This epoxy resin is chemically engineered with Hindered Amine Light Stabilizer (HALS) for non-yellowing protection. These additives allow for long-lasting clarity.

It also has a UV stabilizer that works to protect the resultant product against loss of glossiness, cracking and chalking, as well as delamination. To some extent, it also works together with the HALS additive to prevent yellowing.

Furthermore, it is non-toxic when mixed as recommended by the manufacturer. The mixing ratio should always be 1:1. That means you can only mix 0.5 gallon of resin with 0.5 gallon of hardener.

For added safety of use, this resin has no volatile organic compounds and is non-flammable as well as BPA-free. Basically, the product was able to pass the FDA food-safe certification requirements. Once cured, the epoxy resin turns fully inert for safe food contact.

The safety of use does not stop there, and this resin conforms to ASTM D4236, which makes it appropriate for home use.

You do not have to worry about solvents and non-reactive diluents. There is no ingredient in it that turns airborne and becomes detrimental to health.

What’s more? ArtResin can tolerate a maximum temperature of 120 degrees Fahrenheit or 50 degrees Celsius.

It will be easier for you to work with it as it becomes more flexible at such temperatures. Depending on the number of layers you use, it can be cured in about 72 hours and could take up to 10 days.

Highlighted Features

  • Shelf life of about 6 months once opened and almost a year when unopened
  • UV inhibitors such as Hindered Amine Light Stabilizer (HALS) for non-yellowing protection
  • Fully cures within 10 days
  • Tolerates maximum temperature of 120 degrees Fahrenheit

2. Art N’ Glow Clear Casting and Coating Epoxy Resin 16 Ounce Kit

The best epoxy resin for tumblers should check off all the right boxes. Apart from UV resistance and flexibility, it should also be easy and straightforward to use. In this list, the Art N’ Glow checks most of the boxes.

This kit comes with 8 ounces of resin and 8 ounces of hardener. A total of 128 ounces should already cover 26 square feet of artwork at a poured-down thickness of 1/8th of an inch. Imagine how much that covers when using it on tumblers!

Indeed, this is a forgiving epoxy resin that can enhance your art experience! It works wonders for beginners as it allows for long 40-minute work time.

A few of the many reasons why many artists trust this brand is because of its crystal clear appearance, self-leveling, self-degassing, and odor-free features.

It consists of additives that enhance its UV resistance to prevent yellowing over time. With a mix ratio of 1:1, meaning an ounce of hardener mixed with an ounce of resin should provide you with the best low viscosity mixture.

This resin can withstand a maximum temperature of 120 degrees Fahrenheit. To obtain the best results, make sure to work in an area with an average temperature of 72 to 78 degrees Fahrenheit. The closer you are to 78 degrees Fahrenheit, the better the resin will cure.

Conversely, it works amazingly under cool conditions. If it is in a cooler temperature, you can simply put it in a bucket full of warm water to cure it more quickly. The only downside is the reduced working time from the regular 40 minutes down to 30 minutes.

Apart from that, it does not take more than 3 days for it to be fully cured. After 24 hours, it will have hardened. Beyond 72 hours, it should be completely cured.

Highlighted Features

  • Allows for long 40-minute work time
  • Self-leveling, self-degassing, and odor-free
  • Easy mix ratio of 1:1
  • Fully cures in 3 days

3. Naked Fusion Epoxy Resin Art Resin Crystal Clear Formula 1 Gallon Kit

High performance and superior quality resin do not have to be something a beginner may find difficult to work around with. The Naked Fusion enables everyone, from beginners to professionals, to create a statement artwork.

With its user-friendly 1:1 ratio and longer working hours, you’ll have ample allowance to work on your project!

The kit already comes with 64 ounces or 1.89 liters of resin and hardener each. In total, you have 3.78 gallons of the mixture. Just think about all the tumbler creations you can make with that amount!

Without the toxic chemicals, this resin boasts of its "nakedness." There is no ingredient in it that can turn airborne, which could cause health issues when inhaled.

For the safety of use, Naked Fusion advises artists to use the material in an open space or at least in rooms that are well-ventilated.

In addition to all that, the resin is crystal clear with a glass-like appearance. It is also self-leveling and cures into rock-solid with an incredible high gloss mirror shine!

It consists of UV inhibitors that prevent it from turning yellow over time, especially when subjected to direct UV exposure.

Thanks to all the consistency, low level of viscosity, odorless property, and overall safety of use, you can work on it for 45 minutes continuously. The creation process is almost 5-minute longer than most resins in the market.

This resin's amazing capabilities do not stop there. It can also contain the original shade of colors applied onto it, maintain its clarity, and enhance its effects over time. With its viscosity, you can inject rich colors that will be preserved and maintained inside.

Highlighted Features

  • Has zero amount of VOCs and is odor-free
  • Contains UV inhibitors to prevent yellowing
  • Allows for a 45-minute working time

4. Pro Marine Supplies Crystal Clear Epoxy Resin 1 Gallon Kit

High gloss and resistant to scratches or damage, that kind of integrity can be found with the Pro Marine epoxy resin!

Purchasing this kit will give you half a gallon of epoxy and half a gallon of hardener. Once combined, you get a full gallon of epoxy resin to work with. It can cover almost 37 square feet of artwork with an 8th of an inch thickness. That’s 5 multiple-layered tumblers, to say the least!

You do not have to worry about any airborne chemical odor as the hardener has no VOC or other solvent additives that can cause health problems. It is resistant to UV rays, which prevent it from turning yellow over time.

This resin is incredibly clear and serves as an adequate waterproof barrier to the embellishments and art that you make on the surface of your tumbler. It resists any impact or surface damage.

In addition to that, it is self-leveling, which means you do not have to worry about bumps, holes, crates, or fish eyes. At a mild temperature of 160 degrees Fahrenheit, its surface is greatly improved. This ensures no air bubbles will take their place on the surface.

The curing process should take about 72 hours. In the first 12 to 14 hours, the Pro Marine epoxy resin should already be dry to touch. Yet, the manufacturer advises usage after a full three days.

Just like any other efficient resin, after the application of the final coat, the tumbler is suggested to be kept in an environment with temperatures of 75 to 80 degrees Fahrenheit.

Highlighted Features

  • No VOCs and free of harmful solvents
  • Waterproof and scratch proof
  • Self-leveling

5. East Coast Resin Epoxy Resin Crystal Clear 1 Gallon Kit

Next on the list is the East Coast Resin that boasts of its capacity to produce 100% solids, high-build, crystal clear polymer coating for your tumbler.

In this package, you will get 1.89 liters of epoxy resin and 1.89 liters of hardener. In total, you get a gallon of mixture that can be used for all your tumbler coating requirements.

Take note of the 1:1 ratio of this resin. There is no need to reduce the hardener for any reason, including health and consistency-related ones. For the safety of use and food contact, the epoxy has structural integrity that resists any damage, which often causes leaking chemicals.

This epoxy resin can be used for advanced techniques such as embedding pictures, solid objects, and thick build-ups. It is easy to dam the edges using a smooth, soft, and flexible plastic strip.

Rest assured that the items you coat using it will resist water or UV rays and become permanently preserved as well as protected from the external environment.

Since it has UV inhibitors, you can trust that it will not turn yellow over time. Despite that, it is still prohibited to subject epoxy resin coated artwork into the direct and harsh sunlight.

When it comes to project preparation, it works best if it is used under conditions between 72 to 85 degrees Fahrenheit. It promises full coverage with no air bubbles, even on the second coating.

The East Coast Resin epoxy enables, even beginners, a straightforward and easy application. Breathe life into your first tumbler art and achieve a flawless glass-clear epoxy coated artwork.

Highlighted Features

  • Contains UV inhibitors to protect the surface from harsh sunlight
  • Easy to use mixture with its 1:1 ratio
  • Chemically engineered for embedding objects into the tumbler

6. Angel Crafts Clear Casting Epoxy Resin and Hardener Mix Kit

For tinier tumbler projects, go for this Angel Crafts epoxy resin kit that offers 32 ounces of each part. It is a non-toxic and UV resistant material with low viscosity that produces a high-gloss crystal clear finish!

If large amounts like a gallon of resin are too much for you, this kit will give just the right quantity for your first tiny project. You get a 32-ounce bottle of epoxy resin and a 32-ounce bottle of hardener.

Once both liquids are properly mixed together, you have a total of 25 minutes of working time to do your magic on your tumbler!

The resin is self-leveling, which means with the right speed of hand or any other turning method, you will have a smooth edge and flat surface.

Apart from that, it consists of non-toxic, odorless UV inhibitors to protect it from turning yellow over time. It is also water-resistant as well as blush resistant.

In addition to its resistance to water and UV, it also has no solvents, VOCs, and is non-flammable regardless of its liquid or solid states.

The mixing ratio is similar to the first few brands. There is a 50/50 or 1:1 ratio between resin and hardener. Unlike the others, its first layer cures within less than 37 minutes. Meaning, you will not have to wait for a long time before doing the second coat.

Conversely, a second coating can be carried out between 48 to 72 hours.

Finally, it is approved to be safe for creating projects that will come in contact with food. With its compliance to the instructions as per FDA 21 CFR Sec 175.300 "Resinous and polymeric coatings," the resin is guaranteed safe for coating tumblers.

Highlighted Features

  • Contains non-toxic, UV inhibitors
  • Includes no solvents, VOCs, and flammable ingredients
  • First layer application cures to touch in 37 minutes

7. MAS Epoxies Art Pro Epoxy Resin & Hardener

If you are a professional looking for high-grade epoxy resin, the MAS epoxy resin is the perfect product for you. Similar to other products, it requires a 1:1 mix ratio by volume between the resin and hardener.

Compared to brands in the list that only allow for 40 to 45 minutes, it allows for long 60 minutes of working time. With this, it is deemed to be the best one, even for beginners who take a longer time to finish a tumbler creation.

This ratio allows the resin to resist blush. Its 1:1 non-blushing hardener options prevent you from having to wipe the surface clean. Thanks to its anti-blushing chemistry, it saves you a lot of time and effort.

The package gives you half a gallon of epoxy resin and half a gallon of hardener. In total, you have a full gallon of mixture. You can cover almost 500 square feet. This delivers you plenty of material to work on!

For recoating, there is no need to wait for long hours. MAS epoxy resin products are 100% solid, with no solvents. With that, the recoat time can be as short as it takes to obtain surface tack.

In addition to that, it is suggested to use the epoxy resin at ambient temperatures such as 55 degrees Fahrenheit. The warmer the ambience, the better results you can get out of the epoxy resin.

It has a shelf life of at least a year when unopened. To prolong its shelf life, place the products in the best storage conditions at 60 to 90 degrees Fahrenheit. Make sure it is a dry place to prevent moisture.

Finally, this Art Pro is ultra-clear, self-leveling, and produces high-gloss epoxy resin coating. Its quality and consistency make it a suitable material to be used for all types of tumblers.

Highlighted Features

  • Allows for 40 to 45 minutes working time
  • Applies non-blushing hardener
  • Self-leveling and turns into a high-gloss epoxy resin once fully hardens

8. Counter Culture DIY Clear Artist Resin 8 oz Kit

Last on the list is the best epoxy resin for crafts. The Counter Culture DIY clear resin produces a crystal clear, glass-like finish that enhances the surface of tumblers.

Now, what makes it the best for crafts? Of course, its low viscosity and allowance for a versatile working environment.

In this 8-ounce kit, you will get a 4-ounce resin and 4-ounce hardener. This kit is perfect for those who wish to work on small tumbler projects. Approximately 2-square feet of coverage is provided by the material.

It is applicable and safe for food contact as the epoxy resins turn fully inert when cured. In addition to that, it is FDA compliant. In particular, it complies with the 21 FDA CFR Sec. 175.300.

To make it safer for food contact, rest assured that there are no solvents or diluents in the resin. It is VOC-free and highly UV resistant. It consists of a UV inhibitor that prevents the final product from turning yellow easily.

Those are not the only external factors that the resin can resist. It is also heat resistant, up to 500 degrees Fahrenheit.

The resin is fully cured in about 24 hours and takes 8 to 12 hours to cure to the touch. Counter Culture DIY advises making use of their product indoors so as not to subject the artwork to harsh environmental factors.

It takes an average working time of 25 to 40 minutes depending on the ambient room temperature. The warmer the temperature, the easier it is to work the epoxy resin.

How so? Since resin reacts to the room temperature, the material should not heat up immediately if you are working in a room with warm temperature.

Highlighted Features

  • VOC-free and highly-resistant to UV rays
  • Heat-resistant up to 500 degrees Fahrenheit
  • Fully cures in 24 hours

Things to Consider Before Buying Epoxy Resin for Tumblers

If you are wondering how we gathered the brands and products, check out these factors. We advise that you use the same criteria to get ahold of a suitable epoxy material for your project!

Viscosity

This term refers to the thickness of the material. An epoxy's viscosity defines its applications, such as sealing, potting, coating, and priming.

There are three levels of epoxy viscosity: low, moderate, and high. Make sure you obtain a low viscosity epoxy that can be easily layered multiple times and allows for long shelf life.

Cure Time

Cure time is the length of time needed for something to fully cure or dry. Epoxy resins begin to gel as quickly as 20 minutes.

These compounds produce excessive heat when left in a mixing container beyond 10 minutes. Since epoxy pours thinly, it is also a factor why they gel rapidly.

UV Resistance

A good epoxy resin must be capable of containing UV inhibitors. A UV inhibitor is an additive that helps prevent the premature fading of gel exposed to ultraviolet or “UV” light. While epoxy resin has this additive, tumblers that are epoxy-coated should not be directly exposed to UV.

Hardness

In general, epoxy resins are harder than other casting resins. Yet, this is not always the case. While ingredients of the resin have nothing to do with its hardness, its viscosity and mixing ratio greatly affects it. Make sure to get low viscosity epoxy resins to obtain the right hardness.

Heat Tolerance/Resistance

There is not one epoxy resin that is resistant to high heat. This material will begin to soften around 120-150 degrees Fahrenheit. Yet, there are epoxy systems that can be applied at that temperature, which can be quite expensive.

Susceptibility to Bubbles

Since low viscosity epoxy resins are thin and easier to pour using multiple layers, they allow bubbles to rise to the surface and vanish. So, go for low viscous epoxy resin.


How to Mix Epoxy for Tumblers

If you already have an idea of what epoxy resin to get, knowing how to mix it tremendously affects your application. Here is an effective resourceful way to mix epoxy for tumblers!

Step 1: Gather Materials

Firstly, get your choice of epoxy resin, measuring medicine cups, silicone cupcake pan, and a wide popsicle stick. It does not stick to silicone, which is why it is best to use them for mixing.

On the other hand, a wide popsicle stick is better than thin ones because they allow for less stirring movement in the cup, which produces fewer air bubbles.

Step 2: Measure

Using your measuring cup, get the amount that you need for hardener and resin. They are sometimes labeled as sides A and B or parts A and B. Make sure the ratio is either 1:1, 2:1, or 100:45, with the hardener being the lesser number.

Step 3: Pour Contents

Put the hardener and the resin into one silicone cup holder. There is no necessary sequence as to which of the two liquids go first. Make sure to scrape all the contents into your holder.

Step 4: Mix

Using a mixer or a wide wooden popsicle as we suggested, gently stir the mixture to prevent air bubbles. As you mix the two parts, it becomes a little bit cloudy. But once they get properly bonded, it should become clear again. Mix for about 1 to 3 minutes.


Frequently Asked Questions

1. Does low viscosity epoxy resin make end projects prettier?

When a material is deemed forgiving, it means it is easy to work with and allows for long shelf life. To answer the question, yes, low viscosity epoxy resin produces prettier end results compared to other thick resins.

2. Which type of tumbler is best to resin?

Regardless of the tumbler you choose, it is best to go for double-walled or insulated ones. Since the maximum temperature that it can come into contact with is 120 degrees Fahrenheit, a regular tumbler may not accommodate hot beverages since it can cause the cured resin to soften.

3. What materials does epoxy not stick to?

Epoxy resins bond poorly in polyvinyl chloride, acrylic, and polycarbonate plastics. They also DO NOT bond on Teflon, polyethylene, polypropylene, nylon, and Mylar.

4. How long should I turn the tumbler?

Regardless of whether you turn the tumbler using your hand or a cup turner, you must continue rotating it slowly for about 4 to 6 hours, depending on the temperature.

5. Is epoxy safe to use for tumblers?

Not all epoxies out there are food safe. One way to make sure the epoxy resin is safe for making tumblers is to check for food safety compliance, and whether it becomes an inert plastic after it is cured. For your safety, we only included products that are safe for coating tumblers on the list.

Final Words

Tumbler crafts and arts should never feel like tedious work. Knowing the right epoxy resin to use for your project should enable you to create a long-lasting piece.

At the same time, you enjoy creating them because they are easy to use. With that, choose only the best epoxy for tumblers that are non-toxic, crystal clear, and of course, do not turn yellow over time.

Leave a Reply